Beko B5RCNE365LXB Bedienungsanleitung Seite 15

Operating the product
4. Fault Condition Indicator
This indicator (
when your refrigerator cannot
perform adequate cooling or in case
of any sensor error. On the freezer
compartment temperature indicator the
letter "E" and on the cooler compartment
temperature indicator the numbers 1, 2,
3 will be displayed. The numbers on the
indicator specifies the service regarding
the failure. If you place hot food in
the freezer compartment or leave its
door open for a prolonged time, an
exclamation mark can be lit. This is not
a fault, this warning shall be removed
when the food is cooled down or when
any key is pressed.
5. Quick Freezing Key
When the quick freeze key is pressed,
the LED on the key is illuminated
and the quick freeze function shall
be activated. Freezing compartment
temperature is set to -27 °C. Press the
key again to cancel function. The quick
freezing function shall be automatically
cancelled after 24 hours. To freeze a
large amount of fresh food, press the
quick freeze key before placing the food
in the freezer compartment.
6. Wireless Key
This button (
wirelessly to your appliance through
HomeWhiz mobile application. If the
button is pressed for a long time
(3 secs) the LED on the button will
blink (in 0.5 second intervals). The
link between the appliance and the
home network is initialized. After the
wireless connection with the appliance
is established the LED will be lit solid.
After initial setup, the connection can
be activated/deactivated by pressing
) shall be active
) is utilized to connect
16 / 30 EN
this button. The LED on the button shall
flash quickly (at 0.2 second intervals) until
the connection is established. When the
connection is active, the LED shall light
up continuously. If the connection cannot
be established for a long period, check
your connection settings and refer to the
"Troubleshooting" section provided in
the user manual. HomeWhiz application
shall be used for wireless connection. The
steps for setup are explained through the
application during setup. You can access
the application by scanning the QR code
on the HomeWhiz label on the appliance.
The application can be obtained from
App Store or from Play Store for Android
devices. For details visit https://www.
homewhiz.com/.
7. Cooling Compartment OFF
(Vacation) Function Key
To activate vacation function (
the button for 3 seconds. The vacation
mode will be activated and the LED on the
button will be lit. "- -" shall be displayed
on the Cooling Compartment temperature
indicator and the cooling compartment
does not actively perform cooling. You
shall not keep your food in the cooling
compartment when this function is
activated. The other compartments
continue to cool according to the set
temperatures. Press the key for 3 seconds
again to cancel this function.
8. Cooling Compartment Temperature
Setting Key
Allows setting of temperature for cooler
compartment (
will enable the cooling compartment
temperature to be set at 8,7,6,5,4,3,2 and
1 °C .
Refrigerator/User Manual
), press
). Pressing this key