Athena GET RX1 PRO Handbuch Seite 10

4.
Twist the throttle
completely in open
position.
While keeping it open,
press and hold the
engine stop button for 5
5 sec.
seconds or until the RX1
turns the fuel pump on
and the MIL light on.
By doing this operation,
the maximum TPS value
is saved.
1 2
5.
Disconnect the wires
from the battery starting
from the black wire (-),
and then the red wire (+).
6.
Unplug the RESET
TPS connector from
RX1PRO main connector
and start the engine.
EN
10