Gaggenau AC230101 Gebrauchs- Und Montageanleitung Seite 37

▶ To ensure correct installation, you must use
a material which is sufficiently stable and
suitable for both the structural conditions
and the weight of the appliance.
Changes to the electrical or mechanical as-
sembly are dangerous and may lead to mal-
functions.
▶ Do not make any changes to the electrical
or mechanical assembly.
Risk of falling when working on the appliance
▶ Use a stable stepladder.
▶ Do not lean over the hob.
▶ Do not step on the hob or the work sur-
face.
The filter cover may swing out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening
until it no longer swings out.
▶ Close the filter cover slowly.
Risk of injury when opening and closing the
hinges.
▶ Keep your hands away from the hinges.
WARNING ‒ Risk of electric shock!
Sharp-edged components inside the appli-
ance may damage the connecting cable.
▶ Do not kink or trap the connecting cable.
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶ Call customer services. → Page 35
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
All manuals and user guides at all-guides.com
Improper installation is dangerous.
▶ Connect and operate the appliance only in
▶ Connect the appliance to a power supply
▶ The protective conductor system of the do-
▶ Never equip the appliance with an external
▶ When the appliance is installed, the mains
▶ When installing the appliance, check that
15.5 Information on the installation situation
¡ Install this appliance on the kitchen ceiling or a sta-
¡ To install additional special accessory parts, obser-
¡ The appliance finds it more difficult to draw in the
¡ The width of the extractor hood must correspond at
¡ To optimally detect the cooking vapours, install the
15.6 Instructions for the electrical
connection
In order to be able to safely connect the appliance to
the electrical system, follow these instructions.
It must always be possible to disconnect the appliance
from the electricity supply. The appliance must only be
connected to a protective contact socket that has been
correctly installed.
▶
▶
▶
accordance with the specifications on the
rating plate.
with alternating current only via a properly
installed socket with earthing.
mestic electrical installation must be prop-
erly installed.
switching device, e.g. a timer or remote
control.
plug of the power cord must be freely ac-
cessible. If free access is not possible, an
all-pole isolating switch must be installed in
the permanent electrical installation accord-
ing to the conditions of Overvoltage Cat-
egory III and according to the installation
regulations.
the power cable is not trapped or dam-
aged.
ble suspended ceiling.
ve the enclosed installation instructions.
cooking vapours the further away they are from the
hotplate. For optimum performance, a maximum di-
stance of 1500 mm is recommended.
least with the width of the hob.
appliance in the middle of the hob.
WARNING ‒ Risk of electric shock!
The mains plug for the mains power cable must be
easily accessible after the appliance is installed.
If this is not possible, an all-pole isolating switch
must be integrated into the permanent electrical in-
stallation according to the conditions of overvoltage
category III and according to the installation regula-
tions.
The permanent electrical installation must only be
wired by a professional electrician. We recommend
Installation instructions en
37