Device-Specific Safety Instructions For Compressed Air Sandblasters - Parkside PDSP 1000 E6 Originalbetriebsanleitung

Device-specific safety instructions
for compressed air sandblasters
■ Check the appliance for any possible defects
before use. If the appliance exhibits any faults,
it should not be used under any circum­
stances.
■ Keep children and bystanders away while
operating the tool. Distractions can cause you
to lose control.
■ RISK OF INJURY! MISUSE! Do not point the
tool towards people or animals!
■ Wear a dust mask!
■
Wear safety goggles!
■ Wear protective gloves!
■ Wear suitable protective clothing.
■
Wear safety shoes!
■ Wear a safety helmet!
■
RISK OF EXPLOSION! The compressed air
sandblaster gun should not be used in areas
with gas/open flames/fire/gas­operated
water heaters.
■ SMOKING PROHIBITED!
■ Work only in sufficiently ventilated rooms.
■ Do not use oxygen or any combustible gas as
an energy source.
■ Never exceed the maximum operating pressure
of 6.3 bar.
WARNING!
► KICKBACK FORCES! At high working pres­
sures, kickback can occur which can, under
certain circumstances, lead to danger due to
continuous loads .
■ 34 │ GB │ MT
■ RISK OF INJURY! Disconnect the appliance
from the compressed air source before starting
any repairs or maintenance work and before
transportation .
■ RISK OF INJURY! Disconnect the appliance
from the compressed air source before refilling
the blasting medium .
NOTE
► Please heed the safety instructions provided
by the manufacturer of the blasting medium .
■ Use only materials that are suited for use in the
compressed air sandblaster gun
quartz sand . This can lead to a dangerous
build­up of silicosis­inducing dust .
■ Take steps to ensure that others are not incon­
venienced (dust formation) .
■ Ensure that the blasting medium is collected so
that it can be disposed of in an environmentally
friendly manner .
■ Do not remove any type plates . These contain
important information for the safe operation of
the appliance .
■ If you are inexperienced with the appliance,
seek training in how to use it safely .
WARNING! TOXIC DUST!
► Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity .
CAUTION!
► Ensure that the appliance is disconnected
from the air supply when not in use, when
exchanging accessories or during repair
work . The air hose should not be under pres­
sure .
. Do not use
PDSP 1000 E6