IKEA LAGAN AA-2189589-3 Bedienungsanleitung Seite 17

ENGLISH
3
A
Put the detergent or
the multi-tablet in
compartment (A).
If the programme has a prewash phase, put
a small quantity of detergent on the inner
part of the appliance door.
When you use multi-tablets that contain salt
and rinse aid, it is not necessary to fill the
salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest
level.
• Set the rinse aid dispenser to the lowest
position.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to select and start a programme
1. Press the button dedicated to the
programme you want to set.
The light related to the button flashes.
2. Activate Power Clean if desired.
3. Close the appliance door to start the
programme.
4
How to select and start the
programme
1. To select , press and hold
seconds.
The light related to the button flashes.
Power Clean is not applicable to
this programme.
2. Close the appliance door to start the
programme.
How to activate Power Clean
1. Select a programme.
2. Press .
The light related to the button is on.
Power Clean is not a permanent
option and must be activated
every time before you start a
programme.
It is not possible to activate or
deactivate Power Clean while a
programme runs.
Activating options often increases
the water and energy
consumption as well as the
programme duration.
How to select and start the
programme AUTO
1. Press
The light related to the button is on.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and
adjusts a suitable wash cycle.
How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
1. Select a programme.
2. Press .
The light related to the button is on.
.
17
for 3