F&P Eson 2 Bedienungsanleitung Seite 4

2 ENGLISH
i
MASK PARTS
Refer to the mask diagram on the inside cover of this guide.
Silicone Seal
Mask Frame
Headgear
Headgear Clips
Note: The Elbow and the Headgear Clips
to be removed from the mask by the home user. If removed
unintentionally, refer to technical information page for assembly.
ii
FITTING YOUR MASK
1. Remove all packaging before using your mask.
2. Hold open the bottom straps of the Headgear
Mask Frame facing downwards.
3. Guide the headgear over your head so that the silicone
seal is resting on your forehead.
4. Place your hands on the bottom straps on either side of the
mask frame and pull out and downwards. Ensure the
silicone seal rests over your nose and the blue top strap is
sitting on your forehead.
5. Gently tighten the headgear straps of the mask headgear
starting with the blue forehead straps followed by the bottom
straps.
All manuals and user guides at all-guides.com
Elbow
Swivel
Frame Socket
Diffuser
are not intended
with the
6. The forehead straps should rest horizontally on the forehead,
just above the ears. If required the crown strap can be
adjusted to achieve this.
1 2
4
Useful fitting tips:
• If you are experiencing mask leaks, you may need to lift the
Silicone Seal off your face and reposition it again.
• Ensure the mask's headgear straps are not fastened too
tightly.
• The forehead straps should rest horizontally on the forehead,
just above the ears.
ENGLISH 3
3
5 6