Operation Of The Control System; Menu Structure; Main Screen - Parker NitroFlow Lab Bedienungsanleitung

6

Operation of the control system

6.1

Menu structure

The menu structure of the control system is built up as shown below. One can always go back to a higher level in
the menu by pushing the
Alarm
display
Log on
6.2

Main screen

Access: This is the start-up screen that automatically appears when the generator is switched on.
Function: Gives access to the different menus.
A
Symbol/data
Status of unit (A)
To turn the unit on, touch the switch
minutes (180 seconds) after the unit has been switched on. The delay time countdown time is shown next to the
text P-RELIEF (see below).
K3.1.142M Manual NitroFlow Lab
-button.
Set Pressure
alarms switch
Information/result
When flashing there is an alarm; touch the symbol and the current alarm will
be shown.
Can be OFF/RUN/STAND-BY/ALARM/P-RELIEF
Menu button, touch to go to settings menu
Switch ON/OFF button, generator will turn ON or OFF
-button. The status will switch to P-RELIEF. The compressors will start three
Main screen
Settings
Options Local
settings
Switch on/off unit
Maintenance Data
logging
- 16 -