Set Image Quality - IFM Electronic efector250 Bedienungsanleitung

Set image quality

automatic defini-
tion of the
exposure time
switching to the
live image mode
This step of parameter setting applies to the adjustment of the image definition and
image brightness.
You can set the image definition via the setting screw on the back of the sensor. The
green Image definition
mum image definition.
The image brightness is set via the
Auto exposure button the sensor will automatically determine a suggestion for the
optimum image brightness.
You will usually work with an external lighting. If you need to use the internal light-
ing of the sensor, you can activate it by means of the selector switch
Info
When editing an existing parameter set, first the stored reference image for this parameter set
is shown. You can activate the live image mode via the
Continue to the next step of parameter setting via the
All manuals and user guides at all-guides.com
indicator bar can be used as orientation for setting the opti-
Exposure time
indicator for
image definition
slider bar. When you activate the
Lighting internal
Live
button.
Next > button.
.
27