Manage Configuration Data - IFM Electronic efector250 Bedienungsanleitung

Manage configuration data

information
about the port
The sensor can store up to 8 configuration data files (parameter sets). These files can
be managed in the represented dialogue page. The stored configuration data files are
indicated in the list and are clearly marked by the list numbers.
By means of the selector switch
parameter set via the switching inputs is permissible (selection
(selection internal
defined by the status of the switching inputs (see annex page 38).
The following possibilities for a configuration data file are available via the buttons:
• Create a new configuration data file:
Select a free list place and activate the
into which you can enter the name of the new configuration data file. Then con-
tinue to the Set image quality
• Activate an existing configuration data file:
With this button you determine the selected configuration data file as active set-
ting. After you have switched on the sensor the evaluation is carried out auto-
matically using the settings from the activated configuration data file.
All manuals and user guides at all-guides.com
activated file
location
information about
the contour sensor
Program Selection
). For the selection external the active configuration data file is
dialogue page (page 27).
file location no.
(list of configuration
data files)
name of activated
data file
you can select if a change of the
Create new button. A dialogue will open
external ) or not
25