Annex; Function Of The Switching Inputs - IFM Electronic efector250 Bedienungsanleitung

Annex

Function of the switching inputs

If the external
Manage configuration data
figuration data file is defined by the status of the switching inputs.
The following truth table applies:
Switching input
A trigger disable time t
figuration data file via the switching inputs. During this disable time trigger signals
cannot be evaluated. To be able to test the trigger readiness the output READY is
switched off during the trigger disable time and only switched on again when the dis-
able time has elapsed.
The trigger disable time is max. 1 s if no connection between the operating program
and the sensor has been established and it is max. 3 s if the operating program is con-
nected with the sensor.
The following diagram illustrates this correlation.
trigger
trigger
disabled
enabled
38
All manuals and user guides at all-guides.com
selection has
via the selection button
1 0
off off
off on
on off
on on
must be taken into account when changing the active con-
p
change of the
configuration file
trigger
enabled
been activated
Program selection
Active
configuration data file
1
2
3
4
trigger
disabled
in the dialogue
, the active con-
switching
input IN0
switching
input IN1
output
READY
trigger
trigger
enabled
input
page