Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation instructions | SKF 42-00 | SKF 82-00
4. Maintenance
4.1.
STATUS
4.1.1.
Current Settings
Under Current Settings, you will find the following information:
·
Firmware version: Displays the firmware version and the output modulation type.
·
Software version: Displays the version of the interface
·
Serial number of the device
·
Device name entered under SYSTEM
·
Processor temperature - must remain below 90° C
·
Ventilation temperature - must remain below 50° C
·
State of the RF output level (only from hardware version 12-2018)
·
Output voltage of the power supply
4.1.2.
Updating software
èAfter an update, initialization data saved with older Software versions can be loaded into the headend with
a newer Software version.
èInitialization data saved with the current Software versions can not be loaded into headends with an
older Software version.
èTherefore, if possible, make a Software update of all headends.
We recommend the AXING SMARTPortal for easier handling and overview.
Download
You can find software/firmware updates for download by entering the article in the search field on
www.axing.com. On the product page you will find the current software/firmware in the Downloads tab.
èDownload the current version of the file to your computer and unpack it.
Update
New software for the graphical user interface can be installed under SOFTWARE FILE.
è Click under SOFTWARE FILE on „Browse...".
è Browse for the file on your computer.
è Click on UPDATE.
The file will be uploaded to the device.
Page 14 of 24 AXING-BA_SKF-42-82-00.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2021-12-13
Werbung
Kapitel
Inhaltsverzeichnis
