Product Description; Scope Of Delivery; Principle Of Operation - axing SKF 42-00 Betriebsanleitung

Operation instructions | SKF 42-00 | SKF 82-00

1. Product description

The SKF 42-00 converts e.g. satellite radio into 8, the SKF 82-00 into 16 FM output signals with RDS. Both
headends have a decoder for AAC-LC. This is the coding format used by German public broadcaster ARD on
ASTRA for satellite radio since July 2021.
SKF 42-00 Multituner | FM quattro 19" unit | AAC-LC + RDS
Four independent multituner inputs
Transmodulates 4 × DVB-S/S2/S2x/T/T2/C into 8 FM radio output signals
SKF 82-00 Multituner | FM octo 19" unit | AAC-LC + RDS
Eight independent multituner inputs
Transmodulates 8 × DVB-S/S2/S2x/T/T2/C into 16 FM radio output signals
Note: The SKF 82-00 can be upgraded to 24 FM output signals using the SKS 1-24 expansion software. Since
the SKS 1-24 software extension must be installed ex works, it must be ordered with the SKF 82-00.
Common features:
·
Supports AAC-LC and DVB-SI to RDS
·
Web-based configuration | Remote maintenance
·
19", 1RU, build-in power supply
1.1.

Scope of delivery

1 × 19" headend with built-in power supply unit
1 × AC power cord
1 × Quick start guide
1.2.

Principle of operation

Headend devices with multituners can receive DVB-S/S2/S2x, DVB-T/T2 or DVB-C. Typically, as shown, SAT
signals are fed in at the inputs.
Note: If SAT signals are temporarily unavailable (e.g. due to snow), the module will reboot every 10 minutes.
This ensures that all configured programmes will be available for the subscribers once the signal becomes
available again.
Page 4 of 24 AXING-BA_SKF-42-82-00.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2021-12-13