Initialization Phase 3 - axing SKF 42-00 Betriebsanleitung

3.4.

Initialization phase 3

In phase 3, the output modulators are configured.
èThe Common Output Level option include a general attenuation of all modulator outputs. The highest
output level is reached with a setting of 20 dB, the lowest level with a setting of 0 dB.
èThe output frequency can be entered in the range 87.5 ... 108 MHz.
è50 kHz steps are permitted.
èA minimum distance of 300 kHz must be maintained between the modulators.
èA volume difference between the programmes can be adjusted in the Output Volume field (+10...-10 dB).
èThe fine level adjustment attenuates the output level of each individual modulator output from 0 to 20 dB
separately. In addition, each modulator output can be deactivated (off).
2021-12-13 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_SKF-42-82-00.pdf Page 13 of 24