Initialization Phase 2 - axing SKF 42-00 Betriebsanleitung

Operation instructions | SKF 42-00 | SKF 82-00
3.3.

Initialization phase 2

In phase 2, the programmes found are displayed in a table. A maximum of 8 or 16 or 24 (SKF 82-00 with
SKS 1-24) of the programmes found can be selected.
The name of a program can be changed. The entered program name will later appear in the display of the
connected radio devices. The maximum length of the program name is 8 characters.
èClick on one of the programs.
Enter an individual program name and click on the green check mark.
This first completes the entry.
èAfter you have changed the desired program name(s), click SAVE CHANGES.
The entered program name(s) are stored in the headend.
Page 12 of 24 AXING-BA_SKF-42-82-00.pdf | Technical improvements, changes in design, printing and other errors reserved. | 2021-12-13