4.2.2.
Changing the password
The default password is: Ramsen8262.
The default password should be changed right after commissioning the headend.
è Type an new password with 8-10 characters (letters and/or digits).
è Re-enter the password.
è Click SAVE CHANGES to confirm and save the changes.
The saving of the password is confirmed.
4.2.3.
Device name
In the section DEVICE NAME you can set a new device name for the headend.
è Enter a name in the field SET NEW DEVICE NAME.
è Click on SAVE CHANGES.
The new device name is shown at the login.
2021-12-13 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_SKF-42-82-00.pdf Page 17 of 24