Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4.
Reboot
4.4.1.
Rebooting
Under REBOOT THE SYSTEM the device can be rebooted.
è Click on REBOOT.
After rebooting, the password must be entered again.
Note: If SAT signals are temporarily unavailable (e.g. due to snow), the headend will reboot every 10 minutes.
This ensures that all configured programmes are available again after reception is possible again.
4.5.
SMARTPortal
4.5.1.
Access to SMARTPortal
If you are a registered user of the SMARTPortal, then you can remotely control the headend via the
SMARTPortal and, if necessary, receive support from AXING.
Prerequisite is an internet connection for the headend.
è In the State field, select Enabled.
è Activate, if required, the option AXING support allowed.
è In the field Location, enter a name for the location of the headend. This name will appear later in the
SMARTPortal to help you identify the headend.
è In the field Email address, enter the e-mail address with which you are registered at SMARTPortal.
è In the field User key, enter the user key that you received when registering at SMARTPortal.
Click on SAVE & REBOOT. The data is saved, the headend is rebooted and the connection to the SMARTPortal
is established.
Where required, you have to adjust the connection data.
2021-12-13 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_SKF-42-82-00.pdf Page 19 of 24
Werbung
Kapitel
Inhaltsverzeichnis
