Cleaning The Pushbutton Chuck - Sirona T3 Turbine Gebrauchsanweisung

3 Care and maintenance
16
3.2

Cleaning the pushbutton chuck

To remove deposits and ensure proper functioning of the
clamping system, the chuck must be cleaned with T1 spray.
At least once a week
Press the highspeed handpiece head with the chuck firmly
against the spray can nozzle and spray the chuck for
1 – 2 seconds.
Always keep the spray can upright!
Wipe off any protective oil that leaks with a lint-free cloth.
Sirona Dental Systems GmbH
59 64 171 D3355