Cooling Spray - Sirona T3 Turbine Gebrauchsanweisung

Sirona Dental Systems GmbH
59 64 171 D3355
2.3

Cooling spray

For T3 highspeed handpieces with fixed connection, the
cooling spray must be set on the dental unit.
ATTENTION! During preparation work, a sufficient
amount of cooling media (water component > 50 ml/min)
must always be available.
Insufficient cooling leads to overheating of the cavity and to
damage to the tooth substance.
Cleaning of the cooling spray nozzles see page 22.
i Operate only with filtered water (< 50 µm).
NOTE
2 Operation
13