Sirona T3 Turbine Gebrauchsanweisung Seite 48

2 Operation
12
FG
(friction grip) burr instrument
ATTENTION! Do not use any extra long or impact burr
instruments. Use only burrs that are approved for highspeed
handpieces (> 300,000 rpm).
Fitting: Press and hold down the pushbutton and push in
the instrument up to the stop.
Test whether the instrument is firmly seated by pulling it.
ATTENTION! Make sure not to press the pushbutton in-
advertently when pulling back the patient's cheek while the
highspeed handpiece is running – Risk of burning the oral
mucosa!
Removing: After it has come to a stop, press the pushbut-
ton and pull the instrument out.
Sirona Dental Systems GmbH
59 64 171 D3355