Specific Safety Warnings - Ryobi RCS36 Bedienungsanleitung

EN
FR DE ES IT PT
POWER TOOL USE AND CARE
 Do not force the power tool. Use the power tool for
the application. The correct power tool will do the job
better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
 Disconnect the battery pack from the power
tool before making any adjustments, changing
accessories, or storing
preventive safety measures reduce the risk of starting
the power tool accidentally.
 Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
 Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
 Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
 Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
 Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
 Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
 When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
 Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
RCS36-23lgs manual(30Dec 2010).indd 13 RCS36-23lgs manual(30Dec 2010).indd 13
NL SV DA NO FI HU CS RU
English
SERVICE
 Have your power tool serviced by a qualified repair
Servicing requires extreme care and knowledge and
power tools. Such
should be performed only by a qualified service technician.
For service we suggest you return the product to your
neatest AUTHORISED SERVICE CENTRE for repair.
When servicing, use only identical replacement parts.

SPECIFIC SAFETY WARNINGS

 Hold the power tool by insulated gripping surfaces
 Keep all parts of the body away from the saw chain
 Always hold the chain saw with your right hand
 Wear safety glasses and hearing protection.
 Do not operate chain saw while up in a tree.
 Always keep proper footing and operate the chain
 When cutting a limb that is under tension, be alert
 Use extreme caution when cutting brush and
13
RO PL SL HR ET
accidentally occurs, flush with plenty of soap and
water. If liquid contacts eyes, immediately seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
only, because the saw chain many contact hidden
wiring. Saw chains contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
when the chain saw is operating. Before you start
the chain saw, make sure the saw chain is not in
contact with anything. A moment of inattention while
operating chain saws may cause entanglement of your
clothing or body with the saw chain.
at the rear handle and your left hand at the front
handle. Holding the chain saw with a reversed hand
configuration increases the risk of personal injury and
should never be done.
Further protective equipment for head, hands,
legs and feet is recommended. Adequate protective
clothing will reduce personal injury from flying debris
or accidental contact with the saw chain.
Operation of a chain saw while up in a tree may result
in personal injury.
saw only when standing on fixed, secure and level
surface. Slippery or unstable surfaces such as ladders
may cause loss of balance or control of the chain saw.
of spring back. When the tension in the wood fibres
is released, the spring loaded limb may strike the
operator and/or throw the chain saw out of control.
saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
LT LV SK BG
2010/12/30 2010/12/30 4:16 4:16