Saving, Retrieving And Deleting Results - Beurer medical BC 58 Gebrauchsanweisung

However, these standard values serve only as a general
guideline, as the individual blood pressure varies in different
people and different age groups etc.
Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The WHO classification in the display shows the range of
the measured blood pressure.
If the values for systolic and diastolic pressure are in two
different WHO ranges (e.g. systolic in the grade hyperten-
sion range and diastolic pressure in the normal range), the
WHO classification on the unit always indicates the higher
range (grade hypertension in the example described).

7. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
measured data, the earliest items of data measured are
lost.
All manuals and user guides at all-guides.com
It is important to consult your doctor regularly for advice.
Your doctor will tell you your individual values for normal
blood pressure as well as the value above which your blood
pressure is classified as dangerous.
Systolic (in mmHg) Diastolic (in mmHg) Measure
≥180 ≥110
160 – 179 100 – 109
140 – 159 90 – 99
130 – 139 85 – 89
120 – 129 80 – 84
< 120 < 80
• Move the touch screen activation switch to the ON posi-
• Make a selection with the MEM button, and then con-
23
Seek medical advice
Seek medical advice
Have it checked regularly by doctor
Have it checked regularly by doctor
Check it yourself
Check it yourself
tion.
firm the desired user memory with the START/STOP but-
ton . If you press the MEM button again, the aver-
age value of all the stored measured values in the user
memory will be displayed. If you press the MEM button
again, the average value of the last 7 days for the morning
measurement will be displayed (Morning: 5 a.m. – 9 a.m.,
display ). If you press the MEM button again, the aver-
age value of the last 7 days for the evening measurement
will be displayed (Evening: 6 p.m. – 8 p.m., display
you continue to press the MEM button, the most recent
). If