Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• Before the measurement, the last saved test result is
briefly displayed. If there is no measurement in the mem-
ory, the instrument always displays the value .
• The cuff automatically inflates. Cuff air pressure is
released slowly. If a tendency towards high blood pres-
sure is already detectable, the cuff is pumped up again
and cuff pressure increased further. As soon as a heart
rate is detected, the heart rate symbol
• After the pressure has been completely reduced, the sys-
tolic pressure, diastolic pressure and pulse readings are
displayed.
• You can cancel the measurement at any time by press-
ing the START/STOP button
screen activation button to OFF.
appears if it has not been possible to perform the
measurement properly. Observe the section in these
instructions for use on error messages/troubleshooting
and repeat the measurement.
• The test result is saved automatically.
• To switch off the device, press the START/STOP button
or push the touch screen activation switch to OFF. If
you forget to switch off the device, it switches off auto-
matically after approx. 1 minute.
Wait at least 5 minutes before taking another measurement!
All manuals and user guides at all-guides.com
is displayed.
or by pushing the touch

6. Evaluating results

Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia dis-
orders during measurement and if necessary indicates the
measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a
condition where the heart rhythm is abnormal as a result
of defects in the bioelectrical system controlling the heart
beat. The symptoms (omitted or premature heart beats,
slow or excessively fast heart rate) may be caused, among
other things, by heart disease, age, physical predisposition,
excessive use of stimulants, stress or lack of sleep. Arrhyth-
mia can only be ascertained through examination by your
doctor.
Repeat the measurement if the flashing icon
played after the measurement. Please note that you should
rest for 5 minutes between measurements and not talk or
move during the measurement. If the icon
often, please contact your doctor. Any self-diagnosis and
treatment based on the test results may be dangerous. It is
vital to follow your doctor's instructions.
WHO classification:
In accordance with the guidelines/definitions of the World
Health Organization and the latest findings, the measure-
ments can be classified and assessed according to the fol-
lowing table.
22
.
is dis-
appears

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis