Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 25 control channels.
However, it can also be switched to a mode with 3, 4, 6, 9 10, or 16 channels if different functions are
required. To be able to operate the device with a DMX controller, the DMX starting address must be set. The
starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation.
1
Press the MENU button so many times until DMX is indicated in the display. Confirm with the ENTER
button.
2
The display indicates 3 CH (3 DMX channels), 4 CH (4 DMX channels), 5 CH (5 DMX channels), 6 CH
(6 DMX channels), 9 CH (9 DMX channels), 10 CH (10 DMX channels), 16 CH (16 DMX channels) or 25
CH (25 DMX channels). Use the buttons UP and DOWN to select the desired DMX channel mode.
Confirm with the ENTER button.
3
Now the display indicates the menu item for the DMX start address ADDR***. Use the buttons UP and
DOWN to set the address. Confirm with the ENTER button.
4
When receiving DMX control signals, the display shows "DMX". If no DMX control signals are available,
the display shows "NO SIGNAL".
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Behavior in the absence of a DMX signal
In the menu settings, you can define the operating status when no DMX signal is received.
1
Press the MENU button repeatedly until the display shows the DMX lost option. Confirm with the
ENTER button.
2
Select an option with the UP and DOWN button and confirm with the ENTER button.
• Blackout = all LEDs are switched off
• Hold = the most recent DMX value is held
• FULL = all LEDs light at 100% brightness
• Static = the device switches to the last selected static color
• Auto = the device switches to the last selected auto program
Pixel layout in 16- and 25-channel mode
35/44
Pixel 1
Pixel 2
Pixel 3
Pixel 4
00133982, Version 1.0
Werbung
Inhaltsverzeichnis
