Stand-Alone Mode - Eurolite Multiflood Pro Ip Rgbw Wash Mk2 Bedienungsanleitung

Stand-alone mode

Preset colors
In the STATIC mode the device will constantly emit one of 27 preset colors.
1 Press the MENU button so many times until STATIC is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Automatic mode
In automatic mode, 25 programs are available that run at an adjustable speed.
1 Press the MENU button so many times until AUTO is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired program (01-25). Confirm with the ENTER
button.
2 Press the MENU button so many times until SPEED is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from 01 (slow) to 09
(fast). Confirm with the ENTER button.
Individual color mix
In the color mode COLOR each of the quadcolor LEDs can be individually adjusted for brightness. The
device will constantly emit the color adjusted.
1 Press the MENU so many times until COLOR is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter R for the color and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3 Confirm with the ENTER button. Now the color green can be adjusted; then blue and white.
Color temperature
In TEMPERA mode the device will constantly emit white light. The color temperature of the light beam is
adjustable.
1 Press the MENU button so many times until TEMPERA is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to select the desired color temperature (1800K- 8000K). Confirm with
the ENTER button.
Total brightness
Menu diMM allows adjusting the total brightness for all stand-alone operating modes.
1 Press the MENU button so many times until diMM is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired brightness (01 = dark, 99 = bright). Confirm with the
ENTER button.
Color fading
FADING mode enables color fading. The speed is adjustable.
1 Press the MENU button so many times until FADING is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired speed (00-99). Confirm with the ENTER button.
Strobe effect
FLASH mode enables strobe effects. The flash frequency is adjustable.
1 Press the MENU button so many times until FLASH is indicated in the display Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired speed (00-99). Confirm with the ENTER button.
32/44 00133982, Version 1.0