Adjusting The Coffee Outlet; Preparing Drinks; Coffee Drinks; Teas / Hot Water - WMF PERFECTION 800L Serie Bedienungsanleitung

7.3| ADJUSTING THE COFFEE OUTLET

For all the drinks available, you can lower or
raise the coffee outlets
of your cup or glass (figu e A15).
NOTE
Splashing or scalding may occur if the
coffee outlets
tion to the size of the cups.

8| PREPARING DRINKS

Preparation: Place the cup(s) under the coffee
nozzles. Press the button for the desired drink.

8.1| COFFEE DRINKS

Possible settings: It is possible to increase the
strength of the coffee by selecting different
number of coffee beans.
You can prepare one or two cups with your
appliance by pushing the
It is possible to adjust the volume of the cof-
fee prepared by operating the quantities scale
on the right side of the screen (possible to do
it before launching recipe and during recipe
flow). The machine starts by grinding the beans,
tamping the ground coffee and finally b ewing
the coffee.
You can stop the preparation at any time by
pressing STOP.
according to the size
15
are set to high in rela-
15
button (figu e C3).
+

8.2| TEAS / HOT WATER

Possible settings: Your appliance allows you to
prepare hot water for teas or herbal tea.
Model 840: One hot water recipe, you can
adjust temperature and volume of the drink
(before and during preparation).
Models 860, 880, 890: Three types of tea (black
tea, white tea, green tea), the hot water tem-
perature is adapted to the drink selection; you
can adjust volume of the drink (before and
during preparation).

8.3| MILKY DRINKS

Refer to figu e D1 – D6 earlier in the instruction.
Before recipe launching
1| Connect the slimmer and longer side of the
milk tube connector
Cappuccino block
NOTE
Take care to well insert the slimmer and
longer side of the milk tube connector
, to insure recipe quality.
12
2| Immerse the other end in a receptacle filled
with milk or directly in your bottle of milk
(figu e D3).
3| Place the cup(s) under the coffee / milk noz-
zles (figu e D6).
Possible settings: It is possible to increase the
strength of the coffee by selecting different
number of coffee beans, and choose drink size.
The steam is used to froth the milk. As a higher
temperature is required when producing steam,
the appliance will run an additional pre-heating
phase. The appliance allows to choose the quan-
tity of milk foam, on several milky recipes.
40
to the One Touch
12
(figu e D1).
6