Lights Settings; Installing The Appliance - WMF PERFECTION 800L Serie Bedienungsanleitung

5.2| LIGHTS SETTINGS

Specific information about the buttons'
backlight
When a button is not illuminated, the corre-
•
sponding function is inaccessible.
When it is slightly illuminated, the function is
•
available and can be selected.
While the function requested is in progress,
•
the light becomes very bright.
Specific information about the light effects
on the base of appliance
When the machine is ON, the base shines
•
brightly. You can switch the light on or off, as
described in section 10.
When the machine is OFF the base does not
•
shine.
When the light is in floating mode, a drink is
•
being prepared.
When the light in the base is blinking, con-
•
sumer intervention is required to finish the
action in progress.
All generic information like warning informa-
•
tion arises on the display panel
NOTE
This Product contains a light source of
energy efficiency class D. Please note
that the light element in the product is not
intended for lighting purposes. The light is
interchangeable by authorized service staff.
Specific information about the spout light of
appliance
The spout light is automatically activated
•
when a recipe is in progress.

6| INSTALLING THE APPLIANCE

Refer to fi st use figu e A1 – A15 earlier in the
instruction.
WARNING
means that you run the risk of fatal injury due
to electricity! Respect the safety guidelines as
indicated as described in section 10.
Place your machine on a stable, flat, heat- e-
sistant surface away from water splashes and
sources of heat. Insure that the location chosen
is sufficiently well ventilated, as the appliance
gives off heat. Please do not place the appliance
on surfaces such as marble. Remove the protec-
tive film f om the display panel
Specific information about the drip t ay
It allows you to collect water or coffee that
might flow out of the appliance during and
. after preparation. It is important to always leave
18
it in place and to empty it regularly.
Switching on the aplliance
Switch on the appliance by pressing the
ON / OFF button
screen. Follow the instructions provided by your
appliance (figu e A1 – A15).
Initial settings
When using the machine for the fi st time, you
will be prompted to configu e various settings.
Follow the indications displayed on the screen.
37
Connect the appliance to an earthed
230 V mains socket. Failure to do so
, WMF-logo appears on the
26
.
18