Configuration In The Web Browser - axing UIM 1-00 Betriebsanleitung

4. Configuration in the web browser

To access the user interface, you need a standard PC/laptop with a network interface, a commercially available
network cable and the actual version of the installed web browser.
The following IP address data is set ex factory for the
IP adresse: 192.168.0.168
Subnet mask: 255.255.255.0
Your PC must be in the same IPv4 network section.
èChange the IP address of your PC/laptop, e.g. to 192.168.0.11, subnet mask 255.255.255.0
èConnect the PC to the RJ-45 Ethernet port NMS.
èEnter the IP address of the device in the address line of your browser.
èEnter admin as the Username.
èEnter admin as the Password.
èAfter successful login, please configure in a secure password.
2021-11-03 | Technical improvements, changes in design, printing and other errors reserved. | AXING-BA_UIM-1-00.pdf
:
NMS control interface
Page 11 of 20