Ossur MIAMI LSO Gebrauchsanweisung Seite 7

Brace Removal
1. Detach Compression System Handles slowly from the belt to loosen
and re-attach them to the sides of the Adjustable Belt.
2. Detach the Overlap Closures and remove the brace.
3. To ensure a proper fit, ensure the Belt Compression System is
stretched to its full width before re-applying the brace.
Brace Adjustments
• To heat mold the panels, use a heat gun (350 °F/175 °C).
• The belt arms can be trimmed anteriorly where the Belt Ends are
folded, or posteriorly by detaching the belt arms from the Hook and
Loop Strip adjacent to the Belt Compression System (Fig. 13).
If trimming posteriorly, ensure the Belt Ends are retained and folded
per Fig 8.
MAINTENANCE / PRODUCT CARE / CLEANING AND CARE
• Miami LSO is designed for minimum maintenance and care.
• The padded covers may be removed from the rigid panels for washing.
• Hand-wash belt and/or cover(s) using mild soap and cold water
• Air dry flat
• Do not machine wash or place in tumble dryer.
REPORT A SERIOUS INCIDENT
Important notice to users and/or patients established in Europe:
The user and/or patient must report any serious incident that has
occurred in relation to the device to the manufacturer and the competent
authority of the Member State in which the user and/or patient is
established.
DISPOSAL
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.
7