Operation; Risk Of Electric Shock - Steinbach Poolrunner Originalbetriebsanleitung

1. Press the brush strip
the bottom of the filter unit
2. Make sure that the brush strip
completely engaged and fits tightly.
The brush is installed.
Removing the brush
1. Remove the filter unit (see section "Cleaning").
4
2. Open all latches on the top part of the filter unit.
3. Separate the top and the bottom part of the filter unit.
4. Unlatch the hook of the brush strip
bottom part of the filter unit
5. Take out the brush strip
The brush is removed.

Operation

Do not operate while swimming! Mortal danger!
Hair or clothing can be sucked in or trapped by the cleaning element, hold persons under
water and, in extreme cases, prevent them from resurfacing.
- Never operate the device while there are persons in the pool.
- Prevent any access to the pool as long as the device is in operation.
Risk of electric shock if the control unit drops into the filled pool while it is connected to the
power supply.
- Pull the power plug out of the socket before lifting the device out of the pool.
into the indentation on
6
.
3
has
6
from the inside and press the brush strip
6
at the same time.
3
.
6
WARNING!
WARNING!

Risk of electric shock!

3
6
3
5
3
6
out of the
6
27