R Signal Button -Setting Up For T-Net; Hearing Aid Compatible - AUDIOLINE TEL7 Bedienungsanleitung

- Commissioning -
3.6 R Signal button -Setting up
for T-NET
You can use the "R" signal button on your
telephone on private exchanges and when
using DEUTSCHE TELEKOM's T-Net functions.
Private exchanges
If you have connected your telephone to a
private exchange, you can use all the facilities
such as call transfer, automatic recall, etc. The
"R" signal button gives you access to these
facilities.
The FLASH time "100ms" will be required on a
private exchange. To make this setting, move
the slide switch on the underside to the
"100ms" position.
You can find out from the dealer from whom
the equipment was purchased whether your
telephone will work on your private exchange
without any problems and which other facilities
you will have access to.
T-NET functions
Your telephone supports the most important
DEUTSCHE TELEKOM added value services
(e.g. brokering, call waiting, three-way
conferencing, etc.). Please contact DEUTSCHE
TELEKOM to gain access to these functions
(some of which are subject to charge). When
using T-NET functions, move the slide switch
on the underside to the "300ms" position.
3.7

Hearing aid compatible

The telephone has a special circuit working on
the basis of induction for transmitting speech
to hearing aids. Please set your hearing aid to
"T".
17