Strainer - Logotherm LogoCool S-Line Technische Information Für Montage Und Betrieb

4.3 Strainer

The strainers on the unit's connection inputs protect the system against sludge and impurities.
These can be flushed through by opening the locking screw. The unit must be depressurised
beforehand.
The strainers are sealed with O-rings. When closing the strainer, ensure the O-rings are seated
correctly.
X–Strainer,
model without fill and drain ball valve
Design of the strainer
18
GB
Legend:
1-Meibes T strainer
2-Filter (24 x 44 mm, mesh size 0.5 mm)
3-Stoppers
4-O-ring
A-Direction of flow
B-Drainage and flushing direction