Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3 Installation
Please follow the safety instructions contained in this document and any additional assembly instructions of other
components during installation! Installing and operating the units incorrectly will invalidate any warranty claims.
S-Line
M-Line
Assembly options: wall-mounted with cooler housing
When installing the device, ensure that there is sufficient space for connecting the pipework and electrical cables.
There must also be sufficient free space above the device to connect the ball valves and flush the device through if
necessary.
There must be a minimum installation clearance of 20 mm on every side.
Approx. 150 mm of free space is required above the unit for its connection!
Take into account any shut-off valves such as optional ball valves and their connections above the unit.
NOTE: Connection lines and ball valves must be fitted with diffusion-tight insulation.
Unit dimensions and connections and the measurements of the cooling housing
Note: For the connections legend, see chapter 3.2
10
GB
Werbung
Kapitel
Inhaltsverzeichnis
