Logocool - Decentralised Heating Interface Unit; Application Limits; Technical Data - Logotherm LogoCool S-Line Technische Information Für Montage Und Betrieb

3. LogoCool - decentralised heating interface unit

3.1 Technical data

S-Line cooling transfer unit: For water-based cooling systems
Cooling capacities
Housing dimensions (H x W x D) in mm
M-Line cooling transfer unit: For water-based cooling systems
Cooling capacities
Housing dimensions (H x W x D) in mm

Application limits

Max. operating pressure - secondary
Max. operating pressure - primary, S-Line
Max. operating pressure - primary, M-Line
Technical data
Description Type
Installation
Cooling system Separation system
Pipework
Heat exchanger Stainless steel plate heat exchanger
Design
Housing
Insulation
Primary side
Secondary side Cooling water (water-based), low-pressure
1 kW to 5 kW
2 kW to 12 kW
5 kW to 16 kW
675 x 630 x 263
9 kW to 24 kW
880 x 650 x 337
3 bar
16 bar
10 bar
Unit for indirect cooling transfer
Wall-mounted
Thermally insulated (S-Line only)
Stainless steel corrugated pipe and brass fittings
White, powder-coated sheet steel panel, full insulation
PUR rigid foam, thickness 30 mm,
Thermal conductivity = 0.023 W/(m*K),
Construction material class: B2, normal combustibility,
Cooling water (water-based), low-pressure
Art-No. 10610.32
Art-No. 10610.22
Art-No. 10610.12
Art-No. 10610.1
5
GB
GB