Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Signal IN
24 V
Set
CIC
Signal OUT
The required backwash interval must be set on
the filter.
Press Set to set the interval.
Key
Press Set for 5 seconds
Display dots flash - device is in programming
mode
Press Set
Press Set
Press Set
Press Set
Pressing the Set key again steps up the number of
h (hours) or d (days).
The hours h run from 1 – 24, followed by days d from
2 – 56, followed by the hours again etc.
Press the Set key until the desired value has been
set. The value is saved 10 seconds after the last in-
put. The display dots fade out. The unit backwashes.
The time until the next backwashing and the pres-
sure difference appear alternately in the display.
The pressure difference is only displayed for large
volumes of water.
The filter is ready for use.
EN
Display
SL 0
SL 1
SL 2
SL 3
1 h
29
Werbung
Inhaltsverzeichnis
