STEPCRAFT DL445 Betriebsanleitung Seite 67

Step
1
2
3
4
5
6
7
8
9
10
After finding a suitable feed, edit the grey-scale-test.nc file. Per default, the feed in the file is set to F1200. If your value
differs from this, you can use the Search / Replace function of your text editor. That way you can change all entries at
once. Open the grey-scale-test.nc file in the freeware Notepad++ or the Windows Editor.
Notepad ++
Click Search - Replace or use the shortcut CTRL - H.
Then enter F1200 into the input field Find what.
Enter your feed into the input field Replace with.
Click the button Replace all and then save and close the file.
Windows Editor
Click Edit - Replace or use the shortcut CTRL - H.
Then enter F1200 into the input field Find what.
Enter your feed into the input field Replace with.
Click the button Replace all and then save and close the file.
Black-contrast-feed test
Feed Feed
Durchgang
[ / ]
mm
s
F360 6
1
F480 8
2
F600 10 3
F720 12 4
F840 14
5
F960 16 6
F1080 18
7
F1200 20 8
F1320 22
9
F1440 10 24
Step
Vorschub Vorschub
[mm/min]
11
F360 6
12
F480 8
13
F600 10
14
F720 12
15
F840 14
16
F960 16
17
F1080 18
18
F1200 20
19
F1320 22
20
F1440 24
65
Feed Feed
[ / ]
mm
s
F1560 26
F1680 28
F1800 30
F1920 32
F2040 34
F2160 36
F2280 38
F2400 40
F2520 42
F2640 44