Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Signal Word
Clean the tool's air vents every four hours by using compressed air. Excessive accumulation of fumes inside
NOTICE
the Laser Head may accumulate to flammable residues.
Do not leave a running CNC system and power tool unattended, but turn the power OFF. Only when a CNC
NOTICE
router or power tool comes to a complete stop and is disconnected from the main power supply it is safe.
The power and feed of the laser tool when carving or cutting is very important, especially when the material
NOTICE
has the ability to burn. Always observe the workpiece material and do not leave the machine unattended
during operation.
Signal Word
When using accessories please always make sure to have the additional operating instructions of the corre-
NOTICE
sponding products and check if the parts are compatible to the STEPCRAFT CNC system and to the control
before using them for the first time.
The CNC gantry milling system is only to be used in a technically perfect condition which is to be ensured
NOTICE
prior to each operation.
Maintain the power tools. Check for misalignment or binding of moving parts, breakage of parts and any
NOTICE
other conditions that may affect the power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
Develop a periodic maintenance schedule for your tool. When cleaning a tool, be careful not to disassemble
any portion of the tool since internal wires may be misplaced or pinched or safety guard return springs may
NOTICE
be improperly mounted. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may
damage the surface.
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
NOTICE
ensure that the safety of the power tool is maintained.
Please only use this machine according to its intended use. If the machine is not used as intended, there is
NOTICE
a risk for persons and of material damages!
Use of the Power Tool
Maintenance and Others
42
Werbung
Kapitel
Inhaltsverzeichnis
