STEPCRAFT DL445 Betriebsanleitung Seite 58

Check if the visual protection brush touches the surface.
The brushes have to touch the surface in order to avoid scat-
tered light. In case the brush does not touch the surface, the
Surface block value has to be adjusted accordingly.
Click .
Enabling a profile selection when starting WinPC-NC can be
a helpful feature.
Navigate to Basic Settings - Display/Operation.
Activate Profile Management upon start up. Click .
To activate the laser tool, navigate to the tab
Technology - Laser and active the option Use laser.
. Your laser tool is now ready to use.
Click and
Save the settings by overwriting your previously created laser
profile.
56