General Safety Warnings - STEPCRAFT DL445 Betriebsanleitung

1.2 General Safety Warnings

Signal Word
NOTICE
Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
Make sure that there is sufficient space around the machine in order for you to work comfortably and so
NOTICE
that the machine can fully extend to its traveling paths. Also keep sufficient clearance to possibly nearby
positioned machines.
NOTICE Please imperatively make sure that the power line is long enough and will not be clamped anywhere.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
NOTICE
dust. Power tools create sparks which may ignite dust or fumes.
Keep children and bystanders at a distance while operating a power tool. Distractions can cause you to lose
NOTICE
control and can result in accidents.
The emergency stop switch has to be easily accessible at all times. Otherwise the machine possibly cannot
NOTICE
be turned off in case of an emergency.
Signal Word
Stay alert, watch what you are doing and use common sense when operating the power tool. Do not use
the power tool while you are tired and/or under the influence of drugs, alcohol or medication. A moment of
inattention while operating the power tool may result in serious personal injury.
Always wear safety goggles when laser tool is not covered in an enclosure with laser light impermeable hous-
ing. Using personal safety devices and working in safe environment reduces the risk of injury.
Depending on the application field of the machine (private or commercial), observe and follow the applica-
ble occupational safety and health, safety and accident prevention and environmental regulations as well.
Ignoring workplace safety can result in accidents.
Every person who operates the product must have read and fully understood all relevant safety and operating
NOTICE
instructions. Misunderstandings may result in personal injury.
The operator is solely responsible for understanding and reading the machine user guide and all relevant
operating instructions in their entirety, as well as for the storage of these documents in immediate vicinity
NOTICE
of the machine. The manufacturer`s instructions concerning the CNC machine and the tools, such as the
milling spindle, are to be adhered to.
Signal Word
Remove any reflective material from the work area underneath the Laser Head. A T-slot aluminum table has
to be fully covered with a wood plate. Reflective material can cause uncontrolled scattered radiation which
can be harmful to the eyes or skin.
This product is not intended for use as a medical equipment, in human or veterinary medical applications.
Serious personal injury may result.
The Visual Protection Brush must touch the workpiece material during operation to avoid scattered radia-
tion.
Work Area Safety
Personal Safety
Special Physical Effects
39