Basic Settings - JUNO JGVL608E2 Benutzerinformation

10
1) 2)
Programme
60min
90min
Intensive
ECO
AUTO
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com

BASIC SETTINGS

You can configure the appliance by
changing basic settings according to your
needs.
Num‐ Settings
ber
1 Water hard‐
ness
2 Rinse aid level
3 End sound
4 Auto door
open
5 Key tones
Water (l)
13.3
12.9
13.2
11
12.8
10.4
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Values
Description
From level 1L Adjust the level of the water softener ac‐
to level 10L cording to the water hardness in your area.
Factory setting: 5L.
From level 0A Adjust the level of the rinse aid according to
to level 6A the necessary dosage.
Factory setting: 4A.
1b (on) Activate or deactivate the acoustic signal for
0b (off) the end of a programme.
Factory setting: 0b.
1o (on) Activate or deactivate the AirDry.
0o (off) Factory setting: 1o.
1F (on) Activate or deactivate the sound of the but‐
0F (off) tons when pressed.
Factory setting: 1F.
Energy (kWh)
0.927
1.043
1.130
0.922
1.120
0.613
1)
Duration (min)
60
90
160
240
170
60