TERMA SKT 4 Blue Gebrauchsanweisung Seite 73

Automatic heating program schedule
The control application allows you to program many different 7-day work
schedules and to upload any of the programmed schedules to the memo-
ry of any Blue heating element paired with the mobile device (see Tutorial
in the control application). When uploading a schedule to the heating ele-
ment's memory, a message confirming the action appears on the portable de-
vice screen, but does not yet indicate a change in the heating element's op-
erating mode.
When the schedule is activated, the RGB LED lights up in green.
ANTI-FREEZE protection
Please go to Manual Operation section. A message informing about activa-
tion of the anti-freeze protection will appear on your mobile device screen.
EN
TROUBLESHOOTING
Problem Possible cause
Device is connected
Power connection
to electricity, LEDs
problem.
don't light up.
During operation Heating element
the blue RGB LED communicates with
comes on and off. your mobile device.
The device heats
Electronics
despite turning it off
damaged.
with the buton.
If the problem persists please contact Your local Distributor.
User Manual - SKT 4 Blue, SOA Blue electric heating element
Solution
Check the power wire
connection, plug and
the socket.
Heating element works
properly.
Disconnect the device
completely, wait until it
cools down and re-con-
nect it again.
73