TERMA SKT 4 Blue Gebrauchsanweisung Seite 70

SOA Blue
Blue LEDs – temperature setting indicators
Temperature adjustment and Bluetooth pairing
RGB LED – TIMER, schedule and Bluetooth communication indicator
The SOA Blue electric heating element is equipped with a sensor for
controlling room temperature. Note: By default the device controls the
heating output. The Terma BlueLine application makes it possible to
switch the heating element into room temperature measurement mode.
Turning on the unit for a specified period of time does not mean that it
will receive the same maximum power at all times. The element when
switched on, works at nominal power level for a short time to reach
programmed temperature and then periodically turns itself on and off,
consuming just as much energy as is needed to maintain the set tem-
perature taking into account external conditions.
70 User Manual - SKT 4 Blue, SOA Blue electric heating element
On/Off button and TIMER switch
The heating element's construction, as well as the physical characteris-
tics of the heating medium, cause the lower radiator tubes (especially
the bottom two) to have a lower temperature than the rest of the radi-
ator – this is perfectly normal.
The SOA can be operated using the buttons on the housing (see sec-
tion Manual Operation) or via a mobile device – smartphone, tablet (see
section Remote Control).
EN