Maintenance; Warranty Terms & Conditions - TERMA SKT 4 Blue Gebrauchsanweisung

Maintenance

• Always disconnect the device from electricity before you start clean-
ing the radiator or heating element.
• Recurrently check level of the heating medium inside the radiator.
• Clean the item with a dry or damp cloth with a small amount of deter-
gent without any solvents or abrasive agents.
Warranty terms & conditions
1. The subject of this warranty is a Terma electric heating element. The
product name and characteristics are specified on the packaging.
2. By accepting the device on purchase, the Client confirms that the
product is of full value. The Client should immediately inform the
Seller of any discovered faults — otherwise it will be understood that
the product was faultless at the time of purchase. This refers espe-
cially to any faults or damages of the control panel case.
3. The Warranty period for the product is 24 months from the date
of purchase, but no longer than 36 months from the date of
production.
4. The proof of purchase (receipt, invoice, etc.) constitutes the basis for
warranty claims. Lack of the proof of purchase allows the manufac-
turer to reject a warranty claim.
EN
5. This warranty does not cover any faults that are due to:
• incorrect (not in accordance with the manual) installation, use or
disassembly,
• incorrect use of the heating element (i.e. for any purpose that is
not specified by the Manufacturer as intended for this type of
product),
• product being handled by unauthorized persons,
• fault's or damages caused by the Client after having purchased
and accepted the product.
6. The Central Heating installation should be fitted with lock-shield
valves, enabling disassembly of the radiator or the heating element
and its control head without the necessity of emptying the whole
system of the heating agent. Any problems or expenses arising from
the absence of lock-shield valves in your installation cannot be used
as grounds for any claims against the Supplier or Manufacturer of
the device.
7. The Manufacturer is obliged to remove any production fault with-
in 14 working days of receipt of the faulty device at the Manufac-
turer's premises.
8. Should the repair be impossible, then the manufacturer is obliged to
replace the faulty product with a new, full-value unit of identical
parameters.
9. The attached User Manual is an integral element of the Warran-
ty. Please read it carefully prior to the installation and use of the
product.
User Manual - SKT 4 Blue, SOA Blue electric heating element 63