TERMA SKT 4 Blue Gebrauchsanweisung Seite 53

8. All installations to which the device is connected should comply with reg-
ulations applicable in the country of installation and use.
9. Extension leads or electric plug adapters should not be used in order to
supply power to the heater.
10. While connecting the radiator to electric installation ensure that the cur cuit
has a 30 mA residual-current circuit breaker and an appropriate over current
circuit breaker. With the permanent installation (cable connec tion without
plug) it is also mandatory to have an omni-pole cut-out for disconnecting
the device on all poles, by points of contact with the clearance of 3 mm.
11. The device version labelled F/PB can be installed in bathrooms in zone
1, as defined by applicable law, subject to any additional regulations con-
cerning electrical installations in wet areas. Other versions of the device
can be installed in Zone 2 or beyond.
EN
User Manual - SKT 4 Blue, SOA Blue electric heating element 53