TERMA SKT 4 Blue Gebrauchsanweisung Seite 65

MANUAL OPERATION (direct manual controller operation)
No need to have a mobile device with a controlling app installed.
Heating mode
In local mode, it is possible to set one of 10 settings values:
Use the key / to set the required level. It is possible to set 1 of 10
heating levels: 0 - 100% of the nominal heating output or a range of 18
... 30° C when measuring the room temperature. The icon
current heating status. The set value equal to 0 means that the device
will not heat. The change of the adjustment method should be performed
in the mobile application, while further control can be performed manually.
Dryer mode (timer)
button is used to turn the mode on and set the time after which
the device is to be turned off automatically. In order to activate the
Dryer Mode:
• press button shortly — display panel will show dryer working time
of 1H (1 hour),
• every subsequent pressing of the
ing time (2-4 hours).
indicates the
button will prolong dryer work-
EN
In order to deactivate the Dryer Mode, set the time to 0H (press the
button a few times) or turn the device off and back on.
While the Dryer Mode is active the number of hours remaining to the
end of the program is displayed (a digit and the letter H). During that time:
— to see the set temperature press once any of the
— to change the temperature setting press the
times,
— press the button to modify the time after which the Dryer mode
will be terminated.
User Manual - SKT 4 Blue, SOA Blue electric heating element
/ buttons,
or button a few
65