TERMA SKT 4 Blue Gebrauchsanweisung Seite 72

ANTI-FREEZE protection
When the appliance is not in use (either off or scheduled to be off) but re-
mains connected to the mains and the temperature in the vicinity of the
temperature sensor drops below 6° C, the heating element will automatical-
ly switch itself on to prevent the heating medium inside the radiator from
freezing. Activation of this function is signaled by a flashing middle blue LED.
Remote Control
The SOA Blue has a built-in and continuously active Bluetooth Low Energy
communication module for remote control of the heating element, using pop-
ular mobile devices – smartphones and tablets, both with Android or IOS op-
erating systems*. The heating element is visible by other Bluetooth devices
and appears as SOA Blue Terma. You may need to enter a default authori-
zation code: 123456.
To start the pairing mode in SOA, press and hold
mode is indicated by a flashing single, blue RGB LED.
*QR code to download the user manual for the Terma BlueLine app is on the last page of
this manual
72 User Manual - SKT 4 Blue, SOA Blue electric heating element
Pairing mode, when activated, lasts 30 seconds.
The blue RGB LED will light up each time an active exchange of information be-
tween the heating element and an external control device, takes place.
TIMER mode
The control application allows the Timer to be set for a period of 1 ... 240 min-
utes in the full range of temperatures supported by the heating element and
any temperature measurement method – either internal radiator tempera-
ture or external room temperature. Activation of the TIMER function is indi-
cated by a red RGB LED.
for approx. 5 sec. Pairing
EN