Product Disposal - TERMA SKT 4 Blue Gebrauchsanweisung

7. Follow the subsequent guidelines when connecting the electrical
installation:
a. Brown wire — live connection to the circuit (L).
b. Blue wire — connect to neutral (N)
c. Black wire - Fil-Pilote control (FP).
WARNING: If the FIL-PILOTE interface is not used, the FP wire
(black) must be secured from access to the other wires. DO NOT
CONNECT the "FP" wire to GROUND TERMINAL.
8. Before filling the radiator with heating medium, ensure that the heat-
ing element is fitted properly and that it is water tight.
9. In central heating installation radiator must be fitted with the valves
enabling disconnection of the radiator from the rest of the system.
10. For detailed installation hints — see the last pages of this manual.
62 User Manual - SKT 4 Blue, SOA Blue electric heating element
Notes prior to removal:
1. Before dismantling permanently, disconnect the heating element
from the mains and ensure that the radiator is not hot.
2. Be aware. A radiator filled with liquid can be very heavy. When
moving the radiator, ensure that you take the necessary safety
precautions.
3. Before disassembly, close the appropriate valves and drain the radia-
tor completely to avoid causing any damage.

Product disposal

This product should not be disposed of as general waste but should be
brought to the appropriate collection point for recycling of electric and
electronic devices. This information is provided by the sign on the product,
user manual and packaging. Information on the appropriate point for used
devices can be provided by your local authority, product distributor or the
store from where the product was purchased. Thank you for your effort to-
wards protecting the environment.
EN