Manual Operation - TERMA SKT 4 Blue Gebrauchsanweisung

MANUAL OPERATION

a mobile operating device with installed control application may, but does not need to be
in the range
Press briefly the key to switch on the heating element.
Use the key to set 1 of 5 heating levels. It is possible to set: 30-40-
60-80-100% of the nominal heating output or a range of 15 ... 30° C
when measuring the room temperature. The change of the adjustment
method should be performed in the mobile application, while further control
can be performed manually.
Each short press of the key increases the heating level from 1 to 5,
the next press returns the setting to level 1, and so on.
The number of lit up, blue diodes corresponds to the selected heat-
ing level of the device.
EN
TIMER mode
Press and hold the key to activate the 2 hour TIMER, i.e. to dry a towel or
warm up a room. Single RGB LED will turn red.
When the set time elapses, the heating element automatically returns to the
settings from before the activation of the timer function. With the TIMER
function active, you can freely modify the heating level (
If the heating element was switched off prior to timer start-up, the unit will
switch itself off automatically after the time elapses.
Press briefly the key to stop the timer function at any time.
User Manual - SKT 4 Blue, SOA Blue electric heating element
key).
71