5. Maintenance
In the menu item MAINTENANCE, status information of the head-end can be viewed and the technical
conditions can be configured.
5.1.
STATUS
5.1.1.
Current Settings
Under Current Settings, you will find the following information:
·
Firmware version: Displays the firmware version and the output modulation type.
·
Software version: Displays the version of the interface
·
Serial number of the device
·
Device name entered under SYSTEM
·
Processor temperature - must remain below 90° C
·
Ventilation temperature - must remain below 50° C (only from hardware version 12-2018)
·
State of the RF output level (only from hardware version 12-2018)
·
Output voltage of the power supply
2021-08-01 | Technical improvements, changes in design, printing- and other errors reserved.
39