Kemper MINI-TRESOR Einbau- Und Bedienungsanleitung Seite 9

EN
Note! In some countries the use
of combination units with water
and electric is not permitted. Please
follow the specific regulations for
the relevant country, if you want
to install the product outside of
Germany.
Note! In case of assembly the
Tresor in swimming pools or faci-
lities with compareable ambient
conditions, a regular cleaning of
the complete Tresor is necessary as
described before.
Danger! According to VDE require-
ments KEMPER MINI-TRESOR for
power and water connection have
to fuse by a residual current circuit
breaker (residual current 0,03A).
This applies to all sockets in outdo-
or area.
Disposal
Local regulations on waste
recycling and disposal must be
followed. The product must not be
disposed of with household waste
but must rather be disposed of
appropriately.
Description
1 Built-in wall cabinet
2 4 attachement screws
3 Frost-proof outer fitting or hose bibb
4 2 attachement srews (M6 x 12)
5 Socket (1 piece)
6 Mounting plate
7 4 Screws for mounting plate and spray protection plate (M6 x 10)
8 Spray protection plate
9 Trim frame and door with flap
10 Door lock with 3 keys
9 / 16 – K410021100001-00 / 09.2021 – © www.kemper-olpe.de