Functional Testing - Kemper MINI-TRESOR Einbau- Und Bedienungsanleitung

Installation of the trim frame with door
5
to the built-in wall cabinet
Fill insert rail with clear silicon
Push the trim frame with door (9) with the lateral guide slots over
1.
the (pre-assembled) screws, until the frame lies flush with the
outer wall of the building.
Then secure the trim frame with door (9) using the screws.
2.
The integral flap for hose and cable connection is for safety purposes
uring use.
6

Functional testing

Conduct functional testing of the frost-proof outer fitting (3).
1.
Note!
Due to the automatic draining of the frost-proof outer
fitting (3) after removal of water, water will continue
to drain out for a few seconds after closing the fitting
(frost safety). For this reason, the fitting only needs to be
closed gently.
Note!
To ensure the correct 'frost safety' function, hoses and
other attachements must be removed before the start of
the frost period!
13 / 16 – K410021100001-00 / 09.2021 – © www.kemper-olpe.de